Fiber proof testers are created to use a set load to Fiber Drawing Machine in order to test the effectiveness of the spliced Fiber. Our Fiber proof testers can be purchased in both linear and rotary designs, for both proof and tension screening. Fiber proof testers are for sale to solitary setting, multimode, and polarization-maintaining fibers. Choose from dedicated, standalone systems or multipurpose styles which are also able to stripping, cleansing, cleaving, splicing, and recoating.
Fiber Recoaters with Proof Testers provide simple, incorporated answers to recoat and check fusion-spliced materials. The Fiber recoating procedure restores the barrier covering to your stripped Fiber, offering much more flexibility compared to a heat-shrink protection sleeve, enabling that it is dealt with and coiled without damaging the combination-spliced area. The incorporated linear or rotary Proof tester enables users to immediately test a recoated Fiber with a pre-decided load and find out the long-term longevity of the Fiber. Because of the ability to recover a combination-spliced Fiber to close to original problem, these systems are ideal for applications including undersea optical Fiber cables, submarine communication wiring, Fiber lasers, or Dispersed Bragg Reflector (DBR) lasers.
This process starts with the combination-spliced section of Fiber becoming positioned in the center of the mold set up (see picture towards the right). As soon as set constantly in place, inserts within the Fiber obstructs safe the spliced Fiber in place. Recoat materials is pumped into the cavity and after that Ultra violet-cured. The recoated Fiber can then be analyzed by tugging onto it as much as a pre-determined weight.
Recoater and Mold Set up Choices – Recoaters can be purchased with either an automated or handbook mold set up. The automated mold set up features pneumatic control of the mold dishes and is enhanced for high-volume manufacturing applications. Handbook mold assemblies, on the other hand, use easy-to-open mold plates which provide more versatility and are ideal for reduced-volume production or RAndD programs. An automatic or handbook volumetric dispensing pump and injection system is used to inject the recoat materials to the mold cavity.
The SZ Stranding Line comes regular having a mold set up for Ø430 µm coated materials; For our manual recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly is sold individually so that customers can choose the right mold coating diameter for application. Custom mold coating dimensions are available up to Ø900 µm. Pre-setting up the mold set up at the manufacturer is also available. Get in touch with Technology Support to learn more about custom molds or factory set up.
We provide each high-directory (Item # AB950200) and reduced-index (Item # PC373) recoat components to be used in these recoaters. Recoaters with handbook shot pumps (Item #s PTR206B and PTR307B) are compatible with each kinds of recoat material; all the other recoaters are suitable for the top-index material only. Our handbook recoaters with an automatic shot program (Item #s PTR206 and PTR307) can be personalized to work with both the low- and high-index recoat materials; make sure you contact Technology Support for additional information.
Proof Tester Options – The PTR206, PTR206B, and PTR208 Fiber Recoaters include an incorporated linear Proof tester, which takes the Fiber as much as a predetermined weight (20 N) then releases it. The linear Proof tester uses exactly the same Fiber keeping obstructs since the recoater and thus the Fiber will not must be moved prior to testing. The PTR307 and PTR307B Fiber Recoaters include an integrated rotary Proof tester, which can carry out each Proof and tension assessments (?89 N). A single set of Proof check grips is included; substitute Proof test grips are available listed below in packages of 10. Each screening process is fully automated through the included handset or tablet control, allowing qyjflh user to pick parameters including the load, the pace where the stress is used, and the hold time.
Inserts for Fiber Keeping Blocks – In addition to the above, we offer a number of inserts to use within the Fiber keeping obstructs of the recoaters in order to aid a broad range of Secondary Coating Line coating diameters. For recoaters with a rotary Proof tester, the inserts are suitable for Fiber covering diameters in a range from 125 µm to 900 µm. For recoaters having a linear Proof tester, the inserts include a range for Fiber films from Ø250 µm to Ø900 µm.